Accessories UbiBot® IoT

Support WS1 / WS1 Pro / SP1

DS18B20 Temperature Probe

Stainless steel temperature probe for use in extreme environments

W Probe size: 0.6 dia x 5cm
USB connector: Micro USB (for WS1 / WS1 Pro), Mini-Jack (for SP1)
Cable length: 300cm, 500cm
Probe material: stainless steel
Cable type: plain round / flat for refrigerators and freezers (only USB version)
Accuracy: ±0.5°C (over the range -10℃ to +85℃)
Temperature range: -55℃ to 125ºC (-67°F to 257°F)
Use cases: greenhouses, animal breeding, refrigerated logistics

Support WS1 / WS1 Pro

UbiBot Water Resistant Case for Outdoor Use

Protect your device in damp environments

IP Rating: IP54 or IP53 with connected external probe
Use cases: greenhouse, horticulture, forestry
Size: 14.5 * 21cm (suitable for WS1 and WS1 Pro)

Wodoodporne etui ochronne do rejestratorów Ubibot

Support WS1 / WS1 Pro

Micro-USB Cable Splitter

Multi-function female USB extension cable allows simultaneous charging and data sync

Weight: 11.7g
Cable Length: 18.5cm
Connector: Micro USB Male to two Female

Rozgałęziacz mcro-usb do rejestratorów Ubibot

Support WS1 Pro / GS1 / SP1

TH30S-B Temperature & Humidity Probe

Monitoring temperature and humidity simultaneously with one probe

Accuracy: ±0.3℃ ; ±2% RH
Port: Micro USB (for WS1 Pro), Mini-Jack (for GS1 and SP1)
Size of Sensor: 7.5*1.5cm (diameter)
Cable Length: 500cm (USB) or 300cm (mini-jack)
Material: PE + stainless steel
Communication protocol: RS485 Modbus
Operating Condition: -40°C to +80°C (-40°F to +176°F); 0 to 100% RH

Czujnik temperatury i wilgotności TH30S-B

Support WS1 Pro / GS1 / SP1

Soil Temperature and Moisture Sensor

Monitoring the soil temperature and humidity with embedded RS485 interface

Item Weight: 100g
Material of Probe: Stainless steel
Connector: Micro USB (for WS1 Pro), Mini-Jack (for GS1 and SP1)
Power Supply Range: DC 5V to 24V
Operating Condition: -40°C to +80°C (-40°F to +176°F), 0 to 100% RH
Storage Temperature Range: -40°C to +80°C (-40°F to +176°F)
Accuracy: ±0.5°C
Output Interface: RS485
Communications Protocol: Modbus

Czujnik temperatury i wilgotności gleby Ubibot

Support WS1 Pro / GS1 / SP1

PT 100 Industrial-grade Temperature Probe

Professional mechanism, high-quality material, specially designed for industrial use

Monitoring range: -50 to 400℃
Size of probe: 6 * 200mm
Size of USB cable: 3.5 * 500mm
Connector: Micro USB (for WS1 Pro), Mini-Jack (for GS1 and SP1)
Communications protocol: ModBus RTU
IP rate of probe: IP 68

Support WS1 Pro / GS1

Wind Speed Sensor (Anemometer)

Wind speed monitoring via the built-in RS485 interface

Measuring range: 0-30m/s
Accuracy of measurement: ±(0.3+0.03v)m/s
Response time: <1s
Stabilisation time: <1s
Energy consumption: <1W
Working temperature range: -30°C to +75°C
Working humidity range: 15 to 85% RH
Probe material: Polycarbonate
Connector: Micro USB (for WS1 Pro) and Mini-Jack (for GS1)
Cable length: 3m
Power supply: 5V-24V DC
Output interface: RS485
Communication protocol: Modbus

Support GS1

PoE Splitter

It allows the GS1-AETH1RS to be powered by PoE (Power over Ethernet) even though the GS1 does not support this technology directly. Requires IEEE 802.3af compliant power supply.

Input: IEEE 802.3af (DC 37-57V,15.4W) from a compatible PoE power supply or switch/router
Outputs: 12V DC (12V 1A, 13W ) and 10/100Mbps Ethernet

Support GS1

Solar-cell Panel

Supply power to your devices

Solar Panels: Polycrystalline
Maximum Power (Pmax): 6W
Voltage at Pmax: 6V
Current at Pmax: 1A
Open Circuit voltage: 7.2V
Short Circuit Current: 1.1A
Power Tolerance: ±3%
Dimensions: 180 x 270 x 18mm

Panel do zasilania rejestratorów Ubibot GS1

Support GS1

Carbon Dioxide Sensor CO2

CO2 probe on 3m cable for GS1 temperature and humidity loggers for indoor and outdoor use

Only for UbiBot GS1 devices
Readings displayed on the GS1 screen
Remote access to measurements via application or web browser
Ability to set alarms to indicate when the normal reading range is exceeded
Power supply from GS1: DC5V, DC12V
Measuring range: from 0 to 10000ppm
Accuracy: ±(30ppm+3%)
Resolution: 0.1 ppm
Operating temperature: 0°C to +50°C (32°F to +122°F)
Dimensions: 65x46x29 mm
Cable length: 3 m

Support GS1

Alarm Siren

A light-acoustic signalling device to prevent critical alarms from being missed

Power supply: 12V, 24V, 220V
Power: 10W
Volume: 110dB
Light source: bulb
Weight: 0,48KG
Dimensions: 94 mm x 178 mm (w x h)

Support WS1 Pro / GS1

RS485-USB Adapter

Calibration device for UbiBot sensors with RS485 interface such as soil temperature and humidity probe, industrial temperature probe PT100

Weight: 21g
Dimensions: 63 x 36 x 20 mm
Colour: Black
Interfaces: Micro USB, audio jack, UART

Adapter for calibration of UbiBot sensors with RS485 interface

Support WS1 Pro / GS1 / SP1

Local light and sound alarm

A light/acoustic siren to ensure you don't miss critical alarms. The alarm can be triggered by a rule set on any UbiBot device. The alarm can be triggered when preset thresholds are exceeded on the local or other working device in the system (located in the same or a different physical location).

Plug: Micro USB (for WS1 Pro) and Mini-Jack (for GS1 and SP1)
Power supply: 5V (from the USB port of the datalogger or Smart Jack to which it is connected)
Power: <1W
Volume: 90dB
Light source: LED
Dimensions: 1300 x 680 x 700 mm (L x W x H)
Communication protocol: RS485 Modbus

Accessories for UbiBot data loggers

DS18B20 Temperature Probe

UbiBot Water Resistant Case for Outdoor Use

Micro-USB Cable Splitter

TH30S-B Temperature & Humidity Probe

Soil Temperature and Moisture Sensor

PT 100 Industrial-grade Temperature Probe

Wind Speed Sensor (Anemometer)

PoE Splitter

Solar-cell Panel

Carbon Dioxide Sensor CO2

Alarm Siren

RS485-USB Adapter

Local light and sound alarm